 |
| Place of Origin: | China |
| Brand Name: | UPCERA |
| Certification: | CE、 FDA 、CFDA、KFDA |
| Model Number: | ST-Color |
| Price: | Negotiation |
|---|---|
| Packaging Details: | Carton |
| Payment Terms: | T/T |
| Supply Ability: | 10 working days after received your payment |
| Density Before Sintering (g/cm3): | 3.1±0.5 G/cm3 | Density After Sintering (g/cm3): | 6.08±0.01 G/cm3 |
|---|---|---|---|
| CTE After Sintering (25-200℃): | (10.5±1.0)x10-6K-1 | 3-point Bending Strength After Sintering (MPa): | 1100Mpa |
| Average Transmittance: | 25~39% | Chemical Solubility After Sintering (μg/cm2): | < 100 |
| Radioactivity After Sintering (Bq/g): | <0.1 | Sintering Temperature (℃): | 1450-1550℃Recommended 1530℃ |
| High Light: | zirconium dioxide ceramic,dental ceramic materials |
||
Dental Laboratory Milling Supplies Core Dental Ceramics ST 16 Pre - shaded
Specifications:
ST COLOR block: suitable for single shaded crown and bridge with VITA classic 16 shades(A1/A2/A3/A3.5/A4/B1/B2/B3/B4/C1/C2/C3/C4/D2/D3/D4)
| ZZ CAD/CAM | D95-10 | |
| D95-12 | ||
| D95-14 | ||
| D95-16 | ||
| D95-18 | ||
| D95-20 | ||
| D95-22 | ||
| D95-25 | ||
| D95-30 |
Indications:
| ST Color |
crown | √ |
Bridge | √ |
3-4 units bridge | √ |
5-6 units bridge | √ |
Bridges over 7 units | √ |
Cantilever bridge | √ |
Inlay bridge | √ |
Maryland bridge | √ |
Telescopic crown | √ |
Personalized abutment | √ |
Operation Guide:
1 .Place a zirconia block in your CAD/CAM machine and machine it following the manufacturer’s instructions.
2 .After machining is completed, remove the zirconia block from the CAD/CAM machine first. Then remove the framework from the zirconia block with a diamond disc. Subsequently, place the framework on a sintering tray with zirconia beads and put them in the oven for sintering.
3 .Program the furnace according to its instruction manual and zirconia block’s sintering chart, and then start sintering.
4 .Do not remove the sintered framework until it is fully cooled down. Examine the sintered framework for wall thickness, margin fit and seat fit. If necessary, make minor adjustments with a water cooled diamond tool.
5 .Make sure no wall thickness is less than 0.5mm and no connector is thinner than 9mm2.
6 .Rinse the sintered framework with water and dry completely.
Contact Person: sales
Tel: +8613438862501
Multilayer Dental Zirconia Blocks CE ISO FDA Certificated Zirconia Dental Material
Dental Laboratory Milling Supplies Zirconia CAD CAM Blank TT White 49% Translucent
Cerec Zirconia Blocks Manul Milling System Compatible For Zirconium Dental Crowns
Cerec Zirconia Blocks 98×12 mm Low Radioactive For Porcelain Crown
ST White Blank High Translucent Zirconia Dental For Open System 16 Shades
ST White Dental Zirconia Blank 16 Shades Upcera System Compatible
Dental Zirconia Blank HT Blocks High Translucent for Open CAD / CAM System
Pre Sintered Dental Zirconia Blank St Multilayer For Sirona System
Super Transparent Dental Zirconia Blank 16 Colors Without Coloring Liqiuids
