Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsZirconium Oxide Ceramic

Zirconium Oxide Ceramic , Dental Zirconia Sintering Pre-Sintered Zirconia Discs Zirconium

Zirconium Oxide Ceramic , Dental Zirconia Sintering Pre-Sintered Zirconia Discs Zirconium

Zirconium Oxide Ceramic , Dental Zirconia Sintering Pre-Sintered Zirconia Discs Zirconium

Product Details:

Place of Origin: CHINA
Brand Name: UPCERA
Certification: CE、 FDA 、CFDA、KFDA
Model Number: ST-ML

Payment & Shipping Terms:

Price: Negotiation
Packaging Details: Carton
Delivery Time: 10 working days after received your payment
Payment Terms: T/T
Contact Now
Detailed Product Description
Density Before Sintering (g/cm3): 3.1±0.5 G/cm3 CTE After Sintering (25-200℃): 6.08±0.01 G/cm3
3-point Bending Strength After Sintering (MPa): 1100Mpa Chemical Solubility After Sintering (μg/cm2): < 15%
Cytotoxicity Test: < 100 Sintering Temperature (℃): 1450-1550℃Recommended 1530℃

Zirconium Oxide Ceramic , Dental Zirconia Sintering Pre-Sintered Zirconia Discs Zirconium

 

 

Specifications:

 

Wieland System

D98*10

D98*12

D98*14

D98*16

D98*18

D98*20

D98*22

D98*25

 

 

 

Introduction

 

 Zirconium Oxide Ceramic , Dental Zirconia Sintering Pre-Sintered Zirconia Discs Zirconium

 

Indications

 

 

ST -Multilayer

crown

Bridge

3-4 units bridge

5-6 units bridge

Bridges over 7 units

Cantilever bridge

Inlay bridge

Maryland bridge

Telescopic crown

Personalized abutment

 

Used for dental restoration using different CAD/CAM or manual milling machines. All Blanks are processed through dental laboratories or by dental professionals.

Instruction for use:

1 .   Fix the zirconia blank in the specific clamping device.

2 .   Start the milling process.

3 .   Remove milledcrown or bridge from blank and pre-trim with diamond disc.

4 .   Remove the dust fromthe crown or bridge with air gun.

5 .   Color the crown or bridge with coloring liquid, Final-dry frame under infrared lamp (see manual for coloring liquid).

6 .   Load into furnace.

7 .   Select sintering program and start sintering(see sinter instructions).

8 .   Remove sintered crown or bridge from furnace after the furnace temp drop to room temperature.

9 .   Check crown or bridge on working model for sitting and margin fit. Trim with grinder and polisher if required.

10 . Clean with brush using water. Do not steam-clean.

11 . Choose glaze to finish the restoration.

12 . Now the restoration is ready for the try-in.

 

Contact Details
Shenzhen Upcera Dental Technology Co., Ltd.

Contact Person: Vivian

Send your inquiry directly to us (0 / 3000)

Other Products