Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsZirconium Oxide Ceramic

FDA Zirconium Oxide Ceramic Super Translucent Multi - Layer Zirconia In Dentistry

FDA Zirconium Oxide Ceramic Super Translucent Multi - Layer Zirconia In Dentistry

FDA Zirconium Oxide Ceramic Super Translucent Multi - Layer Zirconia In Dentistry

Product Details:

Place of Origin: CHINA
Brand Name: UPCERA
Certification: CE、 FDA 、CFDA、KFDA
Model Number: ST-ML

Payment & Shipping Terms:

Price: Negotiation
Packaging Details: Carton
Delivery Time: 10 working days after received your payment
Payment Terms: T/T
Contact Now
Detailed Product Description
Density Before Sintering (g/cm3): 3.1±0.5 G/cm3 CTE After Sintering (25-200℃): 6.08±0.01 G/cm3
3-point Bending Strength After Sintering (MPa): (10.5±1.0)x10-6K-1 Accelerate Aging Surface Monoclinic Phase Content: 1100Mpa
Chemical Solubility After Sintering (μg/cm2): < 15% Cytotoxicity Test: < 100
Sintering Temperature (℃): 1450-1550℃Recommended 1530℃

FDA Zirconium Oxide Ceramic Super Translucent Multi - Layer Zirconia In Dentistry

 

Specifications

 

Wieland System

Cerac in lab (Sirona)System

D98*10

14*13*13

D98*12

20*14*15

D98*14

20*19*15

D98*16

40*14*15

D98*18

40*19*15

D98*20

55*19*15.5

D98*22

65*25*22

D98*25

65*40*22

 

85*40*22

 

FAQ

 

Q: Is the fit of a zirconia coping important since the zirconia ceramic is so strong?

 

A: The thicker the cement the weaker the all-ceramic restoration. Cements are not as rigid as zirconia ceramic, so a thicker cement layer will cause more flexural deformation of a ceramic core, increasing the potential for fracture.

 

Q: Is it ok to grind on a zirconia coping without water spray?

 

A: Water spray is necessary when grinding on a zirconia ceramic coping. The white light or hot spot you see between a diamond and a zirconia ceramic has been measured at 1500 ºC. If the temperature of zirconia ceramic rises above 1000 ºC, a phase change can occur that will induce cracking and surface defects, lowering the strength of the coping.

 

Q: Is preparation design of a zirconia coping important since the zirconia ceramic is so strong?

 

A: Preparation design of the zirconia coping is very important. The thickness of unsupported porcelain should not exceed 2 mm. The zirconia coping should be as thick as needed to avoid unsupported porcelain.

 

FDA Zirconium Oxide Ceramic Super Translucent Multi - Layer Zirconia In Dentistry

Contact Details
Shenzhen Upcera Dental Technology Co., Ltd.

Contact Person: Vivian

Send your inquiry directly to us (0 / 3000)

Other Products